K&N Pod Part # & Spec's

**Trapshooter** · 10-11-2006 01:12 PM

I just put a small dabbing of contact cement on inside of pod neck and a lil on Carb neck. Sticks ok and wont come off unless you scrap with finder nail. Once dry install them and lighlty tighten. Have never had one that once to come off so far.

Just in case - I did tie them all together by running a bit of thin stiff wire thru the filter elements.

**NIKROC** · 10-17-2006 03:11 PM

Am i able to get parts shipped over to England?? Just wondering as maybe i could save me some money for other parts/goodies...

**visero** · 11-10-2006 11:29 AM

do they offer the lifetime guarantee that K&N does?!?

Mark

**ZX1088** · 11-19-2006 11:32 AM

I see your point, but when is the last time a filter went bad?
Not counting installation error as above.
I love my Rex, but 1m miles? Not likely.

**visero** · 11-20-2006 09:42 AM

...said that the fabric in their knockoff filters when bad and started to deteriorate and seperate.

Mark

**MexRexZero** · 01-18-2007 09:16 AM

Seems everyone tends to gravitate towards the the tapered filter vs a straight shape. Is there an advantage to this?

http://www.knfilters.com/search/prod...x?Prod=RC-1910

Eric

**Zedarics** · 01-30-2007 02:24 PM

I saw in another thread some info about those type of filter. But I cant find them.

http://www.knfilterchargers.com/sear...x?Prod=RC-2362
http://www.knfilterchargers.com/sear...x?Prod=RC-2382
http://www.knfilterchargers.com/sear...x?Prod=RC-2282

Which one will fit ?

Thanks,

Zed.

**Zedarics** · 01-30-2007 03:48 PM

Originally posted by Zedarics
I saw in another thread some info about those type of filter. But I cant find them.

http://www.knfilterchargers.com/sear...x?Prod=RC-2362
http://www.knfilterchargers.com/sear...x?Prod=RC-2382
http://www.knfilterchargers.com/sear...x?Prod=RC-2282

Which one will fit ?

Thanks,

Zed.

Nervermind.. I found it in the "carb jetting and setting" thread.. Go figure..

RC-2382

http://www.zrxoa.org/forums/showthre...hreadid=135836

**daviddell** · 03-05-2007 08:33 PM

ok, I'm confused...Part # for K&N pods for an '04 1200? Anyone help?

**ZRXOA7759** · 03-05-2007 11:03 PM

Part # RU0984, (the ones with black rubber ends instead of the chrome ends) fit perfect on my 2004 1200. If I remember correctly RC0984 are the chrome ones.

**daviddell** · 03-06-2007 06:19 AM

^^^^^ Thank you bro!

**daviddell** · 03-07-2007 06:35 PM

Ok, the K&N #'s for the pods in chrome, but the #62-1010 for the crankcase breather has a black rubber top? Can anyone give me a part #, ( doesn't have to be K&N ) for a breather that is chrome, so it matches the pods?

**ZRXOA7759** · 03-07-2007 08:06 PM

Take a look at:

http://www.knfilters.com/vent.htm

Maybe the 62-1015?

Hope this helps...
-Forster

**daviddell** · 04-01-2007 07:53 AM

didn't like the 62-1010, I wanted some bling, found this at Pep Boys, $10 in a 4 colors, both paper filter and stainless, with chrome accents, good stuff! The red also matches the red accents on my REX....

**MEAN 1** · 06-05-2007 05:43 AM

i'm considering installing K&N pod filters {chrome tops} to my ZRX , but i may just run the modded air box & slip in k&N filter for now ? . time to call the guys @ www.Dynoverks.com.au for a quote ..

**Long Green** · 07-14-2007 04:42 PM

Originally posted by MexRexZero
Seems everyone tends to gravitate towards the the tapered filter vs a straight shape. Is there an advantage to this?

http://www.knfilters.com/search/prod...x?Prod=RC-1910

Eric

I did some looking into this option. I work at a motorcycle parts and accessories distributorship and while the rubber or chrome filters are sold as a set of 4, these are sold as 1 each and if you buy 4 of them you end up paying more total.

Oh and by the way, with my discount, I can get the ru0984 for 85 bucks.

**The Joker** · 07-21-2007 08:15 PM

I have found them is autozone for 105.99 for the RU-0984 and 121.99 for the RC-0984
difference is chrome and rubber.

**irishman001** · 12-11-2007 10:33 AM

Just verified Autozone can get me the RU-0984 for $106.

**daviddell** · 12-11-2007 03:23 PM

I got the K&N's chrome thru Amazon $104 with the shipping included

I since changed the breather to a stainless fliter with all chrome housing $10

I decided I didn't like the red one posted above
^^^^^^

**the amazing gonzo** · 02-26-2008 09:39 PM

daviddell wanna sell the red breather? what brand?

does anyone have instructions on installing the filter breather on the crankcase?

gonz

**kaw-62046** · 01-31-2009 09:37 PM

Does any one have the part # for just one K&N chrone end air filter pod.RC-0984 is for the kit of 4.I lost one.Thanks

**irishman001** · 02-08-2009 10:36 AM

Don't know a part number but they have the measurements on the K&N website so you can bring that with you and find one that matches up. Here are the specs.

http://www.knfilters.com/search/prod...x?Prod=RC-0984

**CVB302** · 05-11-2009 10:01 AM

Anybody know which part # is correct for the pods from APE for a 99 ZRX1100?

Rick61 · 10-21-2009 02:48 AM

Originally Posted by CVB302

Anybody know which part # is correct for the pods from APE for a 99 ZRX1100?

Give Jay a call at APE. Just be sure not to "blaspheme" when he quotes you a price as he is VERY religious & will hang up right about the time you get to the "f" in "how effing much???"

**Ted383** · 12-05-2011 10:47 AM

If you are installing Pods you will be needing this...The storage tray for pod users. More info at http://www.moto-fab.com

Bare finish shown for clarity

"Acorn" or "cap" nuts

.

**pmbiker** · 02-26-2012 12:14 PM

I know this is an old thread, but I just ordered the rubber ended pods from amazon. $80, free shipping. Threw in the crankcase breather for another $20 shipped.

**tsconver** · 03-06-2012 12:06 PM

Originally Posted by pmbiker

I know this is an old thread, but I just ordered the rubber ended pods from amazon. $80, free shipping. Threw in the crankcase breather for another $20 shipped.

Just did the same thing here, great price, seems to be below most peoples cost, I know Ivan said it was below his cost. Have his pod jet kit coming as well as Ted's storage compartment mod.

Thread: K&N Pod Part # & Spec's

Thread Tools

Display

Query

go APE?

warranty

someone on here...

Those threads are hard to find

Re: Those threads are hard to find

CHEAPEST

Re: K&N Pod Part # & Spec's

Re: K&N Pod Part # & Spec's

Re: K&N Pod Part # & Spec's

Re: K&N Pod Part # & Spec's

Re: K&N Pod Part # & Spec's

Re: K&N Pod Part # & Spec's

Posting Permissions