+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 30 of 31

Thread: Price Increases

  1. #1
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Price Increases

    Good morning gents.....just wanted to give you guys a heads up that in the coming weeks/month we will be looking at all of our prices on all products and raising them slightly to make up for the increase in the cost to do business we have seen over the last several years.

    Hoping most understand this as we have never raised a price on a single item we have sold here in the last seven years.

    With that we are getting ready to run a batch of ZRX/ZX14 clamps if anyone wants in on the original pricing. I will accept pre-orders at the original price, but once they are done we are going to slightly raise the price.

    Thank you and have a great day fellas,
    Scott

  2. #2
    New, but just to this Board
    Join Date
    Jun 2008
    Location
    CT

    Re: Price Increases

    Put me down for the pre order run please.

  3. #3
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Quote Originally Posted by epoxy_1 View Post
    Put me down for the pre order run please.
    Sounds good we are taking a 50% deposit, metal was ordered this morning.

    Send in PayPal to pulseperformanceparts@gmail.com and we will get you going.

    Thank you!

  4. #4
    BadAss Hooligan
    Join Date
    May 2005
    Location
    Snohomish, WA

    Re: Price Increases

    Hi Scott,

    Are you going to make any more license plate frames?

    Steve
    You never see a motorcycle parked in front of a psychiatrist's office.


    Steve

    ZRXOA #6575

  5. #5
    BadAss Hooligan
    Join Date
    Jun 2013
    Location
    Niles, Oh

    Re: Price Increases

    Scott, what's the total cost for the ZRX triples in natural with a stem?

  6. #6
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    kawrider1100 - top clamp black (Paid Full)
    LeDuc - Full Set Silver (Deposit 46%)
    epoxy_1 - Full Set Silver??
    jacobzrx1200cafe - Black Anodize (Paid Full)

  7. #7
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Quote Originally Posted by stever View Post
    Hi Scott,

    Are you going to make any more license plate frames?

    Steve

    I have those in stock my friend!

  8. #8
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Quote Originally Posted by Macheater View Post
    Scott, what's the total cost for the ZRX triples in natural with a stem?
    Triples are $700 in raw/silver or $750 for powder coated gloss black.

    We only do the stems in batch orders as my lather guy makes them. Otherwise one stem would be stupid pricey.

    That said 99% of my customers buying triple clamps are saving their money and re-using their stock stem.

  9. #9
    BadAss Hooligan
    Join Date
    Jun 2013
    Location
    Niles, Oh

    Re: Price Increases

    Thanks Scott. If I remember correctly, the stock stem is a PITA to remove. Is there an easy solution to transfer the stock stem?

  10. #10
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Quote Originally Posted by Macheater View Post
    Thanks Scott. If I remember correctly, the stock stem is a PITA to remove. Is there an easy solution to transfer the stock stem?
    Cut the lower with a cut off wheel or ship it to me and for $40 I will machine it out

  11. #11
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    kawrider1100 - Top Clamp Black (Paid Full)
    LeDuc - Full Set Silver (Deposit 46%)
    epoxy_1 - Full Set Black (Paid Full)
    jacobzrx1200cafe - Black Anodize (Paid Full)

  12. #12
    BadAss Hooligan
    Join Date
    May 2005
    Location
    Snohomish, WA

    Re: Price Increases

    Quote Originally Posted by Stites View Post
    I have those in stock my friend!
    PM sent.
    You never see a motorcycle parked in front of a psychiatrist's office.


    Steve

    ZRXOA #6575

  13. #13
    New, but just to this Board
    Join Date
    Jun 2008
    Location
    CT

    Re: Price Increases

    Full set in black please.

  14. #14
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Quote Originally Posted by epoxy_1 View Post
    Full set in black please.
    Okay you will be $750 shipped, do you want anodize black or gloss black powder?

    Also please send in your deposit of $375 to PayPal pulseperformanceparts@gmail.com

  15. #15
    BadAss Hooligan
    Join Date
    Jun 2012
    Location
    massachsetts

    Re: Price Increases

    Just to be sure , so the triple clamps are for the 1200 & can work with Ohlinís Forks correct ?

    Post pics if so , just to get my juices flowing for motivation 😆

  16. #16
    BadAss Hooligan
    Join Date
    Jun 2012
    Location
    massachsetts

    Re: Price Increases

    Iím thinking these Billet triples will balance out an Over Type 10 Swinger 👍🏻

  17. #17
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Designed for the 1200 and if the Ohlins are 50/54 mm then the answer is yes. That said if you haven't ordered them yet order to fit like a 2010 ZX14 as that's how the clamp was designed to retain the stock geometry.

  18. #18
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    kawrider1100 - Top Clamp Blk (Paid Full)
    LeDuc - Full Set Silver (Deposit 46%)
    epoxy_1 - Full Set Blk (Paid Full)
    jacobzrx1200cafe - Blk Anodize (Paid Full)

  19. #19

  20. #20
    BadAss Hooligan
    Join Date
    Jun 2012
    Location
    massachsetts

    Re: Price Increases

    Oh ok , these are for ZX 14 inverted forks .

    Iím running ZRX replacement Ohlinís Forks.

  21. #21
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    We have made billet OEM clamps as well. They were never really great sellers, good but not great. If you can get a total of 5 people to buy in we can make those as well.

    Scott

  22. #22
    BadAss Hooligan
    Join Date
    Jun 2012
    Location
    massachsetts

    Re: Price Increases

    Quote Originally Posted by Stites View Post
    We have made billet OEM clamps as well. They were never really great sellers, good but not great. If you can get a total of 5 people to buy in we can make those as well.

    Scott
    I have 2 & am asking 2 others that may, if they do Iíll try to find 1 more.

  23. #23
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Sweet, the more the better. Would love to be in the 7-8 range if at all possible

  24. #24
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Okay gents the metal for the clamps came in yesterday and today we were supposed to get our soft jaws that we use to hold the clamps.

    Scheduled for tomorrow afternoon now, we should have the machine set-up and running in the next few days to get these clamps going.

    Thanks to those of you that pre-ordered before our pricing goes up.

    Scott

  25. #25
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Okay gents,

    We started machining the first op1 of the top clamps late yesterday and our just finishing up that op as I type. First op of the bottom clamp will be going by lunch time.

    Thanks,
    Scott

  26. #26
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Hey gents we have the clamps almost done at this point. We just need to do the smaller operations to finish them up and add all the holes at different angles.

  27. #27
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    This is your last chance to get a set of these clamps at the original pricing.

    We will be finishing up the clamps tonight and tomorrow and once we are done the new pricing will go in place.

    So if you want a set let me know by the end of tomorrow.

  28. #28
    Hooligan
    Join Date
    Apr 2009
    Location
    Australia

    Re: Price Increases

    I don't know why I can't quote O. S. Triker, but I could be the 5th person that is needed for a run of 43mm triples.
    http://www.zrxoa.org/forums/signaturepics/sigpic26544_3.gif

  29. #29
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Quote Originally Posted by Nelso View Post
    I don't know why I can't quote O. S. Triker, but I could be the 5th person that is needed for a run of 43mm triples.
    5 is enough to rock it.....would love a couple more but if I can get 5 deposits we can get started right away

  30. #30
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: Price Increases

    Here is your 43mm buy in thread

    http://www.zrxoa.org/forums/showthre...60#post5010060

    I tried to PM OS Triker but his box is full so if anyone is in contact please let him know as he could be the deciding factor on whether to run these.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBulletin® Version 4.1.7
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
All times are GMT -4. The time now is 12:34 AM.
vBulletin 4.0 skin by CompleteVB