+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 30 of 43
  1. #1
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Carbon 3D printed River Mark Keyrings

    Would anyone be interested?
    I still have some refining to do though.

    This one is white, but the carbon would be Matt black. It's not pure carbon, it is carbon reinforced PLA.





    Sent from my SM-G935F using Tapatalk
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  2. #2
    avtech3d
    Join Date
    Jun 2012
    Location
    Chandler, Arizona 85286

    Re: Carbon 3D printed River Mark Keyrings

    Kool idea.
    Member #9225
    99 ZRX1100

  3. #3
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    Re: Carbon 3D printed River Mark Keyrings

    Whatever you print to make available for sale, Iíll always buy at least qty 1 Jaco.

    I already have a auto-subscription with ELS. What are you gonna call your outfit?
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  4. #4
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by AV80R View Post
    Whatever you print to make available for sale, Iíll always buy at least qty 1 Jaco.

    I already have a auto-subscription with ELS. What are you gonna call your outfit?
    Either OR ELSE or S74!

    But seriously I dunno...

    Thanks in advance for the support!

    Sent from my SM-G935F using Tapatalk
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  5. #5
    Just call me Gordon
    Join Date
    Aug 2015
    Location
    Springbranch TEXAS

    Re: Carbon 3D printed River Mark Keyrings

    Iím in

    NOV 2017 BOTM
    #9927

  6. #6
    avtech3d
    Join Date
    Jun 2012
    Location
    Chandler, Arizona 85286

    Re: Carbon 3D printed River Mark Keyrings

    I've got a bunch of keychains from ELS. Hell, send Arash 2, I plan on shaking his hand one day

    Name:  images.jpg
Views: 386
Size:  9.8 KB
    Member #9225
    99 ZRX1100

  7. #7
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: Carbon 3D printed River Mark Keyrings

    I am in for atleast one, probable three.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  8. #8
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by avtech2 View Post
    I've got a bunch of keychains from ELS. Hell, send Arash 2, I plan on shaking his hand one day

    Attachment 287730
    Ditto!!! 🤝
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  9. #9
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings



    I will keep you guys posted!
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  10. #10
    BadAss Hooligan
    Join Date
    Feb 2017
    Location
    near Hamburg, Germany

    Re: Carbon 3D printed River Mark Keyrings

    Great idea!
    Count me in for at least one, mate. What will the dimensions be?
    Godspeed Jaco. You're missed down here mate.

    Member number # 10085 ----------- BOTM July 2018 ----------- Restoring the old Gipsy

  11. #11
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by Black-ZRX View Post
    What will the dimensions be?
    What you guys want it to be!
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  12. #12
    BadAss Hooligan
    Join Date
    Feb 2017
    Location
    near Hamburg, Germany

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by jacohatt View Post
    What you guys want it to be!
    Aaah, the agony of choice! I'm bad at decision making.
    That's why I never eat at subways, all those options drive me nuts - at McDonalds the parts list for a Big Mac is set.
    Godspeed Jaco. You're missed down here mate.

    Member number # 10085 ----------- BOTM July 2018 ----------- Restoring the old Gipsy

  13. #13
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by Black-ZRX View Post
    Aaah, the agony of choice! I'm bad at decision making.
    That's why I never eat at subways, all those options drive me nuts - at McDonalds the parts list for a Big Mac is set.
    You must have some underlying Dutch in you...
    In the restaurants over here you only get a few choices since people hate choosing.
    Also no HUGE (Marktkauf- or Carrefour-like) supermarkets.
    I LOVE having choice. So we drive to Germany for our shopping!
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  14. #14
    BadAss Hooligan
    Join Date
    Feb 2017
    Location
    near Hamburg, Germany

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by jacohatt View Post
    You must have some underlying Dutch in you...
    In the restaurants over here you only get a few choices since people hate choosing.
    Also no HUGE (Marktkauf- or Carrefour-like) supermarkets.
    I LOVE having choice. So we drive to Germany for our shopping!
    Normally I have the wife to make choices for me.
    Godspeed Jaco. You're missed down here mate.

    Member number # 10085 ----------- BOTM July 2018 ----------- Restoring the old Gipsy

  15. #15
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: Carbon 3D printed River Mark Keyrings

    The appropriate size to where I can paint it and use 3M emblem tape to add to my factory tank badge.....

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  16. #16
    BadAss Hooligan
    Join Date
    May 2012
    Location
    West Blocton, Alabama

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by NakedFun View Post
    The appropriate size to where I can paint it and use 3M emblem tape to add to my factory tank badge.....

    Cory
    I'll take three like he's referring to.

  17. #17
    BadAss Hooligan
    Join Date
    Feb 2017
    Location
    near Hamburg, Germany

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by NakedFun View Post
    The appropriate size to where I can paint it and use 3M emblem tape to add to my factory tank badge.....

    Cory
    That's what I had in mind too, but then it would need to be without the keyring holder.
    Godspeed Jaco. You're missed down here mate.

    Member number # 10085 ----------- BOTM July 2018 ----------- Restoring the old Gipsy

  18. #18
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    Re: Carbon 3D printed River Mark Keyrings

    You can just sand the key ring off.
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  19. #19
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by AV80R View Post
    You can just sand the key ring off.
    That was my thinking all along....... But would not want it large in diameter. Probable 1-1.25" in diameter. Then I can die cut the #M emblem tape and paint it to match the stock ZRX scripting.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  20. #20
    BadAss Hooligan
    Join Date
    Aug 2001
    Location
    New Braunfels Texas

    Re: Carbon 3D printed River Mark Keyrings

    Add me to the list, gotta at least make a vain attempt to keep up with Arash
    2000 ZRX 1100
    2005 FJR 1300
    2014 KTM 250XC
    2008 KTM 250XC-F
    2010 Dodge RT Challenger
    2005 Ram Quad Cab
    1996 Chevy Pickup

  21. #21
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    Ok no problem. But let me get everything in order first.
    I will let you know when it's ready.
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  22. #22
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    If you guys prefer a badge to be placed on the tank, I can rather do that from the get go.
    And then not in carbon, but in metal-containing (brass) PLA, or satin-gold PLA.
    My idea will then be to create the river mark like on the H2.

    Name:  H2 RM.jpg
Views: 300
Size:  45.5 KB

    But I'm getting carried away.... I have some R&D to do 1st.
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  23. #23
    Just call me Gordon
    Join Date
    Aug 2015
    Location
    Springbranch TEXAS

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by jacohatt View Post
    If you guys prefer a badge to be placed on the tank, I can rather do that from the get go.
    And then not in carbon, but in metal-containing (brass) PLA, or satin-gold PLA.
    My idea will then be to create the river mark like on the H2.

    Attachment 287882

    But I'm getting carried away.... I have some R&D to do 1st.

    I like this ^^^^^^^

    NOV 2017 BOTM
    #9927

  24. #24
    BadAss Hooligan
    Join Date
    May 2012
    Location
    West Blocton, Alabama

    Re: Carbon 3D printed River Mark Keyrings

    Drool....
    Quote Originally Posted by jacohatt View Post
    If you guys prefer a badge to be placed on the tank, I can rather do that from the get go.
    And then not in carbon, but in metal-containing (brass) PLA, or satin-gold PLA.
    My idea will then be to create the river mark like on the H2.

    Attachment 287882

    But I'm getting carried away.... I have some R&D to do 1st.
    Sent from my SCH-I535 using Tapatalk

  25. #25
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    Hey, there's already an improvement...



    Sent from my SM-G935F using Tapatalk
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  26. #26
    BadAss Hooligan
    Join Date
    Feb 2017
    Location
    near Hamburg, Germany

    Re: Carbon 3D printed River Mark Keyrings

    Well done Sir. That's looking like great progress has been made.
    I have no clue about 3D printing but I guess it is about getting temperature and feeding speed adjusted?
    Godspeed Jaco. You're missed down here mate.

    Member number # 10085 ----------- BOTM July 2018 ----------- Restoring the old Gipsy

  27. #27
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    Quote Originally Posted by Black-ZRX View Post
    Well done Sir. That's looking like great progress has been made.
    I have no clue about 3D printing but I guess it is about getting temperature and feeding speed adjusted?
    I have no clue either...

    There are so many variables it's friggen ridiculous.

    I also made a little Scotty dog that came out quite nice!
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  28. #28
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    This is the latest iteration.
    Drawn on autocad, printed at 40mm/s.

    The edges are super crisp. Bottom so thin you can see through it.



    Sent from my SM-G935F using Tapatalk
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  29. #29
    RIP 4/11/19
    Join Date
    Dec 2013
    Location
    The Netherlands

    Re: Carbon 3D printed River Mark Keyrings

    Filet edges vs crisp edges.



    Sent from my SM-G935F using Tapatalk
    ███████ everything ████ ████ ██ is █ ██████ ██ fine ██████ █████ ███. ██████'█ ██ ████████. The ████ ███ █ government █████ ████ ██ knows ████ ████ best █ █████ ██.

  30. #30
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    Re: Carbon 3D printed River Mark Keyrings

    Crisp!!!
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBulletin® Version 4.1.7
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
All times are GMT -4. The time now is 04:37 PM.
vBulletin 4.0 skin by CompleteVB