+ Reply to Thread
Page 1 of 7 1 2 3 4 5 ... LastLast
Results 1 to 30 of 185
  1. #1
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Ok fellas a big thank you should go out to Cory NakedFun for doing all of the preliminary work on this. He is a true craftsman.

    He has come up with plans for the VFR speedo adapter plate to the Couch sprocket cover.

    WE have talked and collaborated and come up with a few minor changes to make it even better.

    So the question of the day, is there interest for me to make the two pieces needed to make the VFR drive work with GC's cover?

    Currently after talking with Cory and looking at a rough preliminary of cost I am thinking the aluminum pieces made and shipped would come in at $75-100. You will need to GC cover, and the VFR drive. I would only be supplying the bushing to drive the VFR drive and the adapter plate that mounts to GC's cover and then the VFR drive would mount to that.

    Would need about 10 people to make this happen.

  2. #2
    BadAss Hooligan
    Join Date
    Mar 2012
    Location
    SoCal

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Scott, and Cory, you guy have meticulous attention to detail and make top notch products. I'm in, and can paypal a deposit if need be to apply assurance to my stated intent.
    "I had an awesome photo to add but the board won't let me post it." - AV80R

  3. #3
    c10's best friend
    Join Date
    Aug 2001
    Location
    Tomball, Tx.

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    In
    Iron Butt Association #18591

    .._...|..\_____________________|_
    ....../ `---___________---- _____|]
    ...../_==o;;;;;;;;__ __________.:/
    .....), ---.(_(__) /
    ....// // \ )
    ...//___//
    ..//___//
    .//___//

  4. #4
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    THE LIST:

    tcps760
    ZRX Mitch
    Ca Pete x2
    272
    h2o tech x2
    Last edited by Stites; 04-23-2016 at 12:20 AM.

  5. #5
    In Charge of McGov Only
    Join Date
    Dec 2000
    Location
    Lakewood, Ca

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    In for two.

  6. #6
    Licensed to Mod
    Join Date
    Nov 2015
    Location
    Md

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    In

  7. #7
    Official ZRXOA water boy
    Join Date
    Nov 2002
    Location
    Houston, Texas

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Don't understand the question, but Im in for two. Everything you make is opulently beautiful
    King of the Bling !

  8. #8
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  9. #9
    BadAss Hooligan
    Join Date
    Jun 2006
    Location
    Houston Tx.

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    what does the greg couch cover look like? and what are the benefits of this conversion ? and do you order the rest of the parts through Honda?? thankyou
    No longer a H.A.R.R. member... let the good times roll......

  10. #10
    Hooligan
    Join Date
    Jan 2006
    Location
    Illinois

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by tcps760 View Post
    Scott, and Cory, you guy have meticulous attention to detail and make top notch products. I'm in, and can paypal a deposit if need be to apply assurance to my stated intent.
    I am in for one.. Thanks Scott and Cory for making this happen..
    You can't fix stupid...

  11. #11
    BadAss Hooligan
    Join Date
    Apr 2011
    Location
    Fort Wayne, IN

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    I'm in for one.

  12. #12
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by Sundance View Post
    what does the greg couch cover look like? and what are the benefits of this conversion ? and do you order the rest of the parts through Honda?? thankyou
    It is mostly bling, both Greg and Scott's work is second to none. You could argue that allow for more frequent chain maintenance and inspection....lol

    http://www.zrxoa.org/forums/showthre...sprocket-cover.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  13. #13
    Hooligan
    Join Date
    Apr 2015
    Location
    Kentucky

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    I think I'm in on this one. Scott, this will work with the GC sprocket cover I sent to you?

  14. #14
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by fahrenheitfarmer View Post
    I think I'm in on this one. Scott, this will work with the GC sprocket cover I sent to you?
    That's the plan. I will update the list in a bit.

  15. #15
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Must resist...I guess I could sell the K-Factory one and buy American
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  16. #16
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by AV80R View Post
    Must resist...I guess I could sell the K-Factory one and buy American
    Resistance is futile.....

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  17. #17
    BadAss Hooligan
    Join Date
    Apr 2011
    Location
    Fort Wayne, IN

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by AV80R View Post
    Must resist...I guess I could sell the K-Factory one and buy American
    Good luck. Nobody will buy the K-factory doodoowhen this part is available. Better just archive it till later.

  18. #18
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by pmbiker View Post
    Good luck. Nobody will buy the K-factory doodoowhen this part is available. Better just archive it till later.
    Yeah, this one is butt ugly. You're right, no one would probably want buy it

    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  19. #19
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by Sundance View Post
    what does the greg couch cover look like? and what are the benefits of this conversion ? and do you order the rest of the parts through Honda?? thankyou
    It will allow you to drive the speedo from the counter sprocket versus the front wheel. It will also make it so you do not have to modify the stock speedo drive to fit with ZX14 forks if you did the front end conversion.

  20. #20
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Update list

    THE LIST:

    tcps760
    ZRX Mitch
    Ca Pete x2
    272
    h2o tech x2
    racerx311
    pmbiker
    farhenheitfarmer

  21. #21
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    I'm in for one Scott.
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  22. #22
    The Mod Father
    Join Date
    Apr 2016
    Location
    Lisburn.,Northern Ireland

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Yep....,I'm in for this too!.... (won't be using it right now..,but will in the future for 'different' wheels)
    Brian.

  23. #23
    BadAss Hooligan
    Join Date
    Apr 2011
    Location
    Fort Wayne, IN

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by AV80R View Post
    Yeah, this one is butt ugly. You're right, no one would probably want buy it

    Very nice part.

    I can't wait to see how this part turns out. For me it'll be replacing a completely functional but not as pretty cover.

  24. #24
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    I will update in the morning fellas, thanks to all that have said they were in!

  25. #25
    BadAss Hooligan
    Join Date
    Dec 2005
    Location
    Maryville, TN

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Just talked with Cory for a little info.......please put me down for one Scott.
    Thanks,
    Dan
    Turbo Division Member # 6

    WHY I STAND:
    The American Flag does not fly because the wind moves past it. The American Flag flies from the last breath of each military member who has died protecting it.

  26. #26
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Quote Originally Posted by pmbiker View Post
    Very nice part.

    I can't wait to see how this part turns out. For me it'll be replacing a completely functional but not as pretty cover.
    It's alright, but Scott and Greg make top notch stuff and I prefer their stuff over this one.
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  27. #27
    I Make Stuff for Me
    Join Date
    Nov 2012
    Location
    Nevada

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Update list

    THE LIST:

    tcps760
    ZRX Mitch
    Ca Pete x2
    272
    h2o tech x2
    racerx311
    pmbiker
    farhenheitfarmer
    AV80R
    BG Wells
    oldkawboy

  28. #28
    Elbow Party
    Join Date
    Dec 2007
    Location
    BK NY

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    If this is a limited run I'd better get in because I know I'll want one as soon as they're all gone.

  29. #29
    CRACKERMAN
    Join Date
    May 2010
    Location
    Nanticoke, PA
    Same here... Put me on the list.
    Quote Originally Posted by John T View Post
    Isaac is NOT a zrx purist.
    #8905

  30. #30
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    Re: STITES Speedo Adapater 2 GREG C Sprocket Cover Interest

    Yes!! Come join the Scott Stites bandwagon.

    Name:  18369b67af109c2f901e72e1a246692b.jpg
Views: 802
Size:  50.4 KB
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBulletin® Version 4.1.7
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
All times are GMT -4. The time now is 03:15 AM.
vBulletin 4.0 skin by CompleteVB