+ Reply to Thread
Page 4 of 11 FirstFirst 1 2 3 4 5 6 7 8 ... LastLast
Results 91 to 120 of 322
  1. #91
    BadAss Hooligan
    Join Date
    Jul 2015
    Location
    Lakewood, CO

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by NakedFun View Post
    Can't say for sure, but they look like they would. As long as the length is the same as the others for reach and the coil resistance is about 1.5 ohms each, they should work.

    Cory
    My zx14 coils feel tight and I can't tell if they are making contact with the spark plug

    I guess I'll find out when I get my harness...

  2. #92
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by MagicMan View Post
    My zx14 coils feel tight and I can't tell if they are making contact with the spark plug

    I guess I'll find out when I get my harness...
    For one, a little smear of Vaseline in the coil ribs and twist as you push them down, they will seat and lock on. Dry is hard to feel them seat.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  3. #93
    BadAss Hooligan
    Join Date
    Jul 2015
    Location
    Lakewood, CO

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by NakedFun View Post
    For one, a little smear of Vaseline in the coil ribs and twist as you push them down, they will seat and lock on. Dry is hard to feel them seat.

    Cory
    I use KY, it works on everything...

  4. #94
    BadAss Hooligan
    Join Date
    Aug 2015
    Location
    Australia

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by NakedFun View Post
    Can't say for sure, but they look like they would. As long as the length is the same as the others for reach and the coil resistance is about 1.5 ohms each, they should work.

    Cory
    Thanks for the answer, I'll email the seller and see if I get an answer.

  5. #95
    BadAss Hooligan
    Join Date
    Mar 2012
    Location
    Lynnwood, WA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by NakedFun View Post
    All,

    I am offering to build 'Plug n Play' harnesses to allow the direct use of the stick ignition coils popular with newer sport bikes such as the ZX10 & ZX14 that are 1.3 to 1.5 Ohms each. Thanks to Sparkyone for compiling this information:

    Suzuki GSXR: 1000 (01-07), 750 (01-05), 600 (01-03)
    oem p/n 33410-35F10/35F00 (Denso p/n 129700-4400/4150)
    4400/1.5 ohms, 4150/1.3 ohms

    Kawasaki: ZX10/14 (04-07) oem p/n 21171-0005/1.5 ohms
    ZX9 (99-03) + ZX12 (03-05) oem p/n 21171-1265/1286
    Z1000 (03-07) + Z750 (05-06) 21171-1286
    Z1000 denso p/n 129700-4580/1.5 ohms
    ZX6 oem p/n 21171-1282/mitsubishi#F6T560
    ZX9 denso p/n 129700-3630/1.3 ohms
    ZX10 mitsu.#F6T549/560
    ZG14/08(Concours) # F6T560

    Honda CBR600RR 04-07(only) oem p/n 30700-MEE-641
    Denso p/n 129700-4510 res. 1.5/1.6 ohms x 2 = 2.9 ohms


    The harnesses will be made using high quality copper strand wire and factory connectors for the coils and high quality spade connectors. All harnesses are sealed, crimped with the appropriate tool, and then soldered for additional robustness. I will make them neat lengths that allow for clean installation. it will be obvious to install, but I will label the connections.

    Price is $40 USD shipped CONUS. Add $25 (USPS Increase) for shipping to Canada or add $35 (USPS Increase) for shipping to Australia and UK. All other inquiries, please ask.

    Harnesses will ship in a USPS Priority Flat Rate box and a tracking number will be provided. I take a lot of pride in my "creations" and if you have any problem with your harness, I will make it right. All harnesses are tested on my bike.

    Here are some threads:

    http://www.zrxoa.org/forums/showthre...48#post4553048

    http://www.zrxoa.org/forums/showthre...ht=Stick+Coils

    I plan on ordering the parts on Friday, February 12th and I thought I would throw this out here for people to sign up if they would like a harness. Reply to the thread below with how many you want. I would collect all the names on Friday evening and procure the connectors, etc.... then commit to delivery dates once all the correct parts are in hand. I just thought I would offer this service to those who may want help. If not, I am also happy to simply offer advice to those who want to build their own.

    List:

    Kwick = 2 (One without Spade connectors) - Shipped - 9405803699300200811284
    GMAN35 = 1
    Isaac = 1 - Paid - Shipped - 9405803699300200784052
    AV80R = 1 - Paid - Shipped - 9405803699300200784021
    tcps760 = 1 - Paid - Shipped - 9405803699300200784069
    MagicMan = 1 - Paid - Shipped - 9405803699300200784038
    RILED= 1
    JankEStang = 1
    Ctb1100 = 1
    Tellz50 = 1 - Paid - Shipped - 9405803699300200784045
    PM Biker = 1
    Uncle Snake = 1 - Paid - Shipped - 9405803699300200784014
    Fabadi = 2

    Dangerous Dan = 1 (Awaiting Final Parts)
    Decadance75 = 1 (Awaiting Final Parts) - Paid

    Total of 15 (17)

    Cory
    Payment send Cory.
    2 harness and 2 connectors

  6. #96
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by fabadi View Post
    Payment send Cory.
    2 harness and 2 connectors
    Ok, thanks! Hopefully the remaining parts will show up over the next 2-3 days and I'll ship out ASAP.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  7. #97
    BadAss Hooligan
    Join Date
    Aug 2015
    Location
    Australia

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by NakedFun View Post
    Can't say for sure, but they look like they would. As long as the length is the same as the others for reach and the coil resistance is about 1.5 ohms each, they should work.

    Cory
    Quote Originally Posted by MaverickAus View Post
    Thanks for the answer, I'll email the seller and see if I get an answer.
    Ok got the answer from the seller looks like no good I'll keep looking

    They are 128mm long. Top to bottom.
    There are two ohm measurements. Primary and secondary windings. I just tested them and there in spec.
    Standard range is primary .8-1.2 ohms.
    Secondary 5.0- 6.8 ohms
    #1 pri 1 ohm
    #2 pri .9
    #3 pri 1.1
    #4 pri 1

    #1 sec 5.76 ohm
    #2 sec 5.61
    #3 sec 5.62
    #4 sec 5.63.

  8. #98
    BadAss Hooligan
    Join Date
    Mar 2012
    Location
    Lynnwood, WA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Can we used 2008 zx14 coil?

  9. #99
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by fabadi View Post
    Can we used 2008 zx14 coil?
    Yes.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  10. #100
    Hooligan
    Join Date
    Oct 2010
    Location
    Florida

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by NakedFun View Post
    All,

    I am offering to build 'Plug n Play' harnesses to allow the direct use of the stick ignition coils popular with newer sport bikes such as the ZX10 & ZX14 that are 1.3 to 1.5 Ohms each. Thanks to Sparkyone for compiling this information:

    Suzuki GSXR: 1000 (01-07), 750 (01-05), 600 (01-03)
    oem p/n 33410-35F10/35F00 (Denso p/n 129700-4400/4150)
    4400/1.5 ohms, 4150/1.3 ohms

    Kawasaki: ZX10/14 (04-07) oem p/n 21171-0005/1.5 ohms
    ZX9 (99-03) + ZX12 (03-05) oem p/n 21171-1265/1286
    Z1000 (03-07) + Z750 (05-06) 21171-1286
    Z1000 denso p/n 129700-4580/1.5 ohms
    ZX6 oem p/n 21171-1282/mitsubishi#F6T560
    ZX9 denso p/n 129700-3630/1.3 ohms
    ZX10 mitsu.#F6T549/560
    ZG14/08(Concours) # F6T560

    Honda CBR600RR 04-07(only) oem p/n 30700-MEE-641
    Denso p/n 129700-4510 res. 1.5/1.6 ohms x 2 = 2.9 ohms


    The harnesses will be made using high quality copper strand wire and factory connectors for the coils and high quality spade connectors. All harnesses are sealed, crimped with the appropriate tool, and then soldered for additional robustness. I will make them neat lengths that allow for clean installation. it will be obvious to install, but I will label the connections.

    Price is $40 USD shipped CONUS. Add $25 (USPS Increase) for shipping to Canada or add $35 (USPS Increase) for shipping to Australia and UK. All other inquiries, please ask.

    Harnesses will ship in a USPS Priority Flat Rate box and a tracking number will be provided. I take a lot of pride in my "creations" and if you have any problem with your harness, I will make it right. All harnesses are tested on my bike.

    Here are some threads:

    http://www.zrxoa.org/forums/showthre...48#post4553048

    http://www.zrxoa.org/forums/showthre...ht=Stick+Coils

    I plan on ordering the parts on Friday, February 12th and I thought I would throw this out here for people to sign up if they would like a harness. Reply to the thread below with how many you want. I would collect all the names on Friday evening and procure the connectors, etc.... then commit to delivery dates once all the correct parts are in hand. I just thought I would offer this service to those who may want help. If not, I am also happy to simply offer advice to those who want to build their own.

    List:

    Kwick = 2 (One without Spade connectors) - Shipped - 9405803699300200811284
    GMAN35 = 1
    Isaac = 1 - Paid - Shipped - 9405803699300200784052
    AV80R = 1 - Paid - Shipped - 9405803699300200784021
    tcps760 = 1 - Paid - Shipped - 9405803699300200784069
    MagicMan = 1 - Paid - Shipped - 9405803699300200784038
    RILED= 1
    JankEStang = 1
    Ctb1100 = 1
    Tellz50 = 1 - Paid - Shipped - 9405803699300200784045
    PM Biker = 1
    Uncle Snake = 1 - Paid - Shipped - 9405803699300200784014
    Fabadi = 2 - Paid - Awaiting Parts

    Dangerous Dan = 1 (Awaiting Final Parts)
    Decadance75 = 1 (Awaiting Final Parts) - Paid
    BamaZRX = 2 (Awaiting Final Parts)

    Total of 15 (19)

    Cory
    Are you still selling these. If so please let me know how I can get one. Thanks

  11. #101
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by Riddler2001 View Post
    Are you still selling these. If so please let me know how I can get one. Thanks
    I think we are going to do this like the ZX11D harnesses and do a second round. I have the parts OH to fulfill the current load of orders so I don't want to keep ordering imparts one harness at a time. These should be complete and shipped over the next few days. Then once all these are done, I'll do a second round of parts of there is interest. I'll add you to the second list an we'll get you taken care of.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  12. #102
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    I have some demand for more of the ZX11D harnesses. So if I am going to order parts for those, I might as well order more components for these ZX10/ZX14 ignition harnesses. I want to time this with the third build for the ZX11D harnesses, so I will leave this open until Friday March 11th. So if you want to buy a harness, state your commitment to buy for the $45 (includes the one, four terminal connector and vinyl cover) USD shipped in CONUS here and on the 11th, I will order in the parts. Thanks again!

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  13. #103
    BadAss Hooligan
    Join Date
    Jul 2015
    Location
    Lakewood, CO

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Got the harness, nice work Cory.

    Thanks,
    Merlin

  14. #104
    Devilsí Advocate
    Join Date
    Aug 2001
    Location
    Large and Prickley

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by MagicMan View Post
    Got the harness, nice work Cory.

    Thanks,
    Merlin
    Dido!

    ooooooooooooo

    WARNING: ELS Products MAY CONTAIN, or be Made With, Patented Parts, Tools, Components and/or Apparati. Manufacturing Facility DOES Contain Nuts.

    PayPal to: Pete@Hyper-Formance.com
    Or: www.PayPal.me/KWICK
    Pete Aronson
    315 West Elliot Road
    Suites 107-487
    Tempe, AZ 85284
    602-397-4869.

  15. #105
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by MagicMan View Post
    Got the harness, nice work Cory.

    Thanks,
    Merlin
    Same here!

    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  16. #106
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Two more harnesses going out tomorrow, but waiting on more payments.....Thanks Guys!

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  17. #107
    Hooligan
    Join Date
    Aug 2013
    Location
    NJ, Burlington County

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Got the harness yesterday and it looks great! Hopefully will have time this coming weekend to hook everything up with the ZX14 stick coils I bought. Thanks again Cory!

    Joe

  18. #108
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Now if I need to write install instructions, let me know. I have the length set so the harness runs down the right hand side of the bike, through the area where the old coils used to bolt in. The LH leg of it runs under the coolant hose over to cylinders 1&2. For connection to the bike, just match colors. Both Red wires from the bike harness go to the Red wires on the harness you bought. Same goes for the Green & Black trigger wires. Feed each of the factory connectors through the small opening of the vinyl cover one at a time. The last connector may be a bit tight, but it goes through. You can help it along with a small blunted object like a small wood dowel or a blunt Phillips screwdriver. Be careful with the screw driver! Just make sure that when you push on each connection that the male spade is going into the femal spade and not between the spade and insulation. They pretty much self center with this connector, but keep an eye out. Once all the connections are done, slide the vinyl cover forward to cover the connector. I would then secure the connector somewhere to the frame via a zip tie. Just keeping everything tidy.

    If after connection, the bike doesn't start, first thing to check is that you have the Black and Green wires connected correctly and not backwards.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  19. #109
    President of the ZRXOA
    Join Date
    Mar 2012
    Location
    Pleasanton, CA

    ZX10/14 Stick Coil PnP Harness - Interest -

    Sounds simple enough...FOR ME TO SCREW IT UP!

    Have I told you about my "groundhog test"?
    Arash (pronounced "our-ash")

    CAUTION - My forum posts may be worth what you paid for them!

    2005 Green RessuREXtion - Amateur 1224 & Six Speed Installation - Oct 2015 BOTM - Yamaha R6 - Aprilia RS250s

  20. #110
    Hooligan
    Join Date
    Jan 2012
    Location
    Front Royal, VA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Cory,

    Please put me down for one harness.

    Will send payment ASAP.

    Thanks!

    -pat

  21. #111
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by mtnpat View Post
    Cory,

    Please put me down for one harness.

    Will send payment ASAP.

    Thanks!

    -pat
    Hi Pat,

    I am full on orders this week, but if you can wait a couple weeks, I am doing a second round of harnesses and was going to order the parts next week on the 11th. Most of the time I will have parts in 2-3 days so the following week I should be able to ship to you (18th).

    Let me know,
    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  22. #112
    Hooligan
    Join Date
    Jan 2012
    Location
    Front Royal, VA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by NakedFun View Post
    Hi Pat,

    I am full on orders this week, but if you can wait a couple weeks, I am doing a second round of harnesses and was going to order the parts next week on the 11th. Most of the time I will have parts in 2-3 days so the following week I should be able to ship to you (18th).

    Let me know,
    Cory
    Absolutely, that is fine. Paypal sent.

    -pat

  23. #113
    Hooligan
    Join Date
    Oct 2002
    Location
    Orange Park, Florida

    Exclamation Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Hey Cory, the pay pal payment is completed... thank you again, Gary
    Last edited by GMAN35; 03-04-2016 at 10:30 AM. Reason: typo
    G,Jorgensen IBEW LU#177,ILA 1593,CWA 1101, Orange Park Fla.
    Journeyman Electrician. comp/tia A+, network+, Professional+, Security+,RFID+
    Microsoft: MCDST. MCP, MCSA+S, CEH, MCSE+S.
    OSCP

  24. #114
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by GMAN35 View Post
    Hey Cory, the pay pal payment is completed... thank you again, Gary
    Got it Gary, harness will ship out in like an hour. Thanks!

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  25. #115
    Satan's Donkey
    Join Date
    Sep 2001
    Location
    Vt.

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Got it. Thanks! -Jake
    -Jake

    Rape is no laughing matter.
    Unless you're raping a clown.

    ZRXOA #2995



    Originally posted by Ca Pete
    "A helmet may save your life, but if you are not wearing the rest of your gear, you may wish it hadn't."

  26. #116
    Old Flat Top
    165.2589

    Join Date
    Aug 2010
    Location
    Nashvile Tn
    I'll take one harness

    Sent from my SAMSUNG-SM-G530AZ using Tapatalk

    BADLY BENT BUT NOT BROKEN

  27. #117
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by ZrxKenn View Post
    I'll take one harness

    Sent from my SAMSUNG-SM-G530AZ using Tapatalk
    Ken,

    Ok you're round two!

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  28. #118
    Old Flat Top
    165.2589

    Join Date
    Aug 2010
    Location
    Nashvile Tn
    Okay

    Sent from my SAMSUNG-SM-G530AZ using Tapatalk

    BADLY BENT BUT NOT BROKEN

  29. #119
    BadAss Hooligan
    Join Date
    Mar 2011
    Location
    Savannah, GA

    Re: ZX10/14 Stick Coil PnP Harness - Interest -

    Quote Originally Posted by ZrxKenn View Post
    Okay

    Sent from my SAMSUNG-SM-G530AZ using Tapatalk
    Hoping that I should be able to ship round 2 harnesses around the 18th.

    Cory
    '99 ZRX (Green) #8998
    '76 KZ900
    '08 Concours 1400

  30. #120
    CRACKERMAN
    Join Date
    May 2010
    Location
    Nanticoke, PA
    Got mine.. Probably won't install for a month or two. Looks great though.
    Quote Originally Posted by John T View Post
    Isaac is NOT a zrx purist.
    #8905


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBulletin® Version 4.1.7
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
All times are GMT -4. The time now is 10:50 PM.
vBulletin 4.0 skin by CompleteVB