
Originally Posted by
Vincent Hill
I posted what "I" thought was a Helpful post about Kwicks Pod Adapters. I noted that if they were originally mounted using the ZX11 Carb O Rings that the Adapters would Warp and to Mount "Not" using the O Rings like Kwick now Suggest. Also that after trial and error I found that if the Adapters were heated for 99 seconds and cooled on a flat surface (like the Sink with a little water), they would be Flat. I also suggested using Kawasaki 3 Bond on the Adapter surface (do all at once) so by the time you do the last one, the first one is ready to Mount.
Last, Kwick suggest to clean the Threads in the Carb Bodies and put a drop of Krazy Glue in the carb body and screw in the bolts "Hand Tight"!! Problem is, you can not turn the Bolts by hand after you put in the Super Glue! I suggested to turn the screws until you can no longer get your fingernail between the Bolt and the adapter, then turn 1/4 turn more.
Someone even posted "Nice Write up"! This was also Removed! Did I just step on ZRXOA's 3rd Rail by posting that the Adapters could warp? Or my Fix was not Approved by the Powers that be? That we are all not created equal and some can decide who can or cannot post on their thread? I sent a PM to Lytnin and have not heard from him yet. So what is the Deal here?