Need help finding a connecting pin for the stick coil harness connector...

[rch10007]

I was trying to pull one of the connecting pins out of its connector and remove the wire from said pin so I could change the wire.

I got it out and proceeded to remove the wire. I broke the pin! Where in the hell do I find another one of those pins?

The only markings on it are W-4 and some sort of symbol. Please help!

Thanks!

[Rexter]

ar you talking on the coil connector?

[rch10007]

Yes. The little female part inside the connector that attaches to the male side on the coil.

[Rexter]

connector kit

http://www.ebay.com/itm/AEM-4-Pack-C...e490de&vxp=mtr

[rch10007]

That would work! All I need is the little metal pins. I went to Radio Shack but no luck. There is a local electronics store that I will hit Monday. I really hope to find just the pins. $30 ain't a big deal so if I don't have luck locally, I will buy that.

Rexter to the resuce again! Thanks!


EDIT - Actually, I found some more used harness for less than $20, so I would go that route instead...

[rch10007]

Another after thought...

I will be better off buying the connection kit (IF I can't find the pins locally). If I buy another harness, I'll just end up breaking those pins trying to loosen them as well.

[John T]

Any local electronics shop will have them. Or you might try radio shack.

[triscadek]

Of all places my local Kenworth dealer carries stuff like that.

[rch10007]

Good idea!