Found a heck of a deal on stainless lines:

[DaddyDave]

Found a heck of a deal on stainless lines from local website. Local got all lines in colors for under $65 TOTAL including shipping. That's a lot less than most stainless vendors...

Reference thread is here:
http://www.bayarearidersforum.com/fo...d.php?t=394551

http://www.stainlesssteellines.com/

Attached is a recent order that covers entire bike:

[SonicGuppy]

Pics?

[Kawi Vandal]

Looks like a great price. I'm tempted to try them out for my rear line just to get a better fit.

[Blown32]

Thanks for the info, looking forward to a update when you get them.

I just picked up a Vulcan Voyager and would like to change out all the lines.

[DaddyDave]

Found a heck of a deal on stainless lines from local website. Local got all lines in colors for under $65 TOTAL including shipping. That's a lot less than most stainless vendors...

Reference thread is here:
http://www.bayarearidersforum.com/fo...d.php?t=394551

If you want pics, just go to the "reference-thread" & ask for them...?
Or, go to the website, or call them.

I have no affiliation w/them, I was simply reporting a good deal for the ZRXOA. I have no detail other than the invoice above. At 50% less than the typical kits, I thought there might be some interest. It's up to you guys to do the research....

-dd

[Kawi Vandal]

I put an order with them through today. I'm about 44.00 shipped for a long front brake and a short crossover. They called me about 2 hours after I put the order in to verify the alignment of the banjo fittings. Very easy to deal with and much cheaper than when I used to build my lines using goodrich hoses and fittings. I'll report back when I get them installed.

[Ropeman]

Under the motorcycle section, they have a front line kit for the Rex's and that costs $75 for two lines and all the connector parts etc.

If I go to the custom section, I can order two lines for under $25.


Am I missing something here?? Or are the bike specific kits for suckers...?

[DaddyDave]

As I said:

I have no affiliation w/them, I was simply reporting a good deal for the ZRXOA. I have no detail other than the invoice above. At 50% less than the typical kits, I thought there might be some interest. It's up to you guys to do the research....
-dd

If I were you, I'd give them a call. I haven't the faintest idea why price difference.

It looks like buying individually is cheaper than a pre-packaged "kit?"

800 number too....

[Kawi Vandal]

That might be because they measured the lines and know they will fit. I got my lines yesterday and they look great. I'll bleed the brakes tonight and see how they feel.

[Somwell]

That might be because they measured the lines and know they will fit. I got my lines yesterday and they look great. I'll bleed the brakes tonight and see how they feel.

[jimmynewts]

Thanks for the heads-up on this!

I ordered the fronts at 32" and 34" for my '01, and got my wife a new front 47" for her Shadow :>().

I also ordered a 10X1.25 double banjo bolt and 20 new 10mm copper washers.

300-03-CUSTOM
[Hose Cover Color:Clear]
[Overall Length:47 inches]
[First End:S3092-03S - STRAIGHT BANJO]
[Second End:S3093-03S - 20 DEGREE BEND BANJO]
$16.90

300-03-CUSTOM
[Hose Cover Color:Clear]
[Overall Length:32 inches]
[First End:S3092-03S - STRAIGHT BANJO]
[Second End:S3094-03S - 45 DEGREE BEND BANJO]
$13.90

300-03-CUSTOM
[Hose Cover Color:Clear]
[Overall Length:34 inches]
[First End:S3092-03S - STRAIGHT BANJO]
[Second End:S3094-03S - 45 DEGREE BEND BANJO]
$14.30


$5.00


$4.00

Subtotal:

$54.10

Shipping Cost:

$7.85

Grand Total:

$61.95