This is just a small sneek peek at my next round of mods.
Welcome to the ZRXOA Message Board.. Please login below or register now.
+ Reply to Thread
Results 1 to 30 of 41
Thread: Sneak Peek
-
02-23-2012 04:45 PM #1
Sneak Peek
Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
02-23-2012 04:57 PM #2Bad, Bad Archaeologist
- Join Date
- Nov 2001
- Location
- First Floor of the Hyundai Building aka: Suzie
Re: Sneak Peek
...Ewe™ can run regular gas with those...
-
02-23-2012 06:23 PM #3I'm not really pissed
- Join Date
- Dec 2008
- Location
- NC Foothills
Re: Sneak Peek
Mmmm... Giggity...
Jesse
Member#8586
Originally Posted by McGovZRX
If it has tits or tires...............it's gonna give ya trouble.
Originally Posted by winters19
-
02-23-2012 06:53 PM #4BadAss Hooligan
The Bean Pod
- Join Date
- May 2008
- Location
- Monroe, NC
Re: Sneak Peek
Someones about to crank up the boost!
That poor wastegate. 
So sorry kwick, no ash trays for you!
-
02-23-2012 09:17 PM #5Eric the Enabler
- Join Date
- Sep 2008
- Location
- Hildreth, Nebraska
Re: Sneak Peek
They look pretty... now put them in and quit teasing up!
your half way there... you tookem out of the box...Turbo Division Member #22
2000 ZRX 1100 Turbo (never done)
1983 RX 50 Chopper (clothes rack)
1963 sears puch (inheritied)
1980 KZ 1000 (out of progress)
It will either go REALLY fast... or blow up spectacularly!!
Amatures built the Arc,
Professionals built the Titanic
-
02-23-2012 09:20 PM #6TALLER THAN KILLERKAW!!
motorcitywho?
- Join Date
- May 2007
- Location
- Chattavegas Tn
Re: Sneak Peek
DIBS!
ZRXOA #8282 ZRX1109 Turbo Division Member #30 December 2012 BOTM winner
Originally Posted by hydrashoks
Originally Posted by McGovZRX
You, Sir, are a bad, bad, tasteless man. Can I marry you?????
-
02-23-2012 09:26 PM #7
Re: Sneak Peek
All in good time. Saturday will be the day. Piston, head w/double valve springs, cylinder studs and nuts, new 12v. fuel shut off valve. Preparing for new turbo. Preparing to install shorter swingarm. As you see the list is extensive. Shouldn't take long though. I've got to hurry up. The weather is getting nice again. Oh yea and by the way, No more 8 psi
Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
02-23-2012 10:30 PM #8BadAss Hooligan
- Join Date
- Oct 2008
- Location
- Anderson Indiana
Re: Sneak Peek
Shorter swingarm hmmm
Turbo Division Member # 29
2003 ZRX-T
1397 Hayabusa all motor 198hp (aka Virgin)
-
02-23-2012 10:35 PM #9
Re: Sneak Peek
Yep, I'm going shorter on the arm. Figured it was time to really unleash the beast and let her fly around some twisties. should be interesting to say the least. Originally Posted by Geoffery86
Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
02-24-2012 07:40 PM #10Significantly Smarter/Faster than zrxrob
- Join Date
- Apr 2007
- Location
- 4000' up in WNC
Re: Sneak Peek
Shiney ash trays
Awesome, very beautiful too pretty to use
KillerKaw
Turbo member #28
BOTM October 2011
03 1224RTI ZRX (TURBO/Intercooled)
8 psi= 195 hp
15 psi= 242 hp/183 TQ
20 psi=
72 CB750K2 (custom)
01 ZRX 1200R Green
some stinkin Virago
http://www.usdebtclock.org/
Oh happy happy day!
People are like rivers. They go crooked when they always take the path of least resistance
-
02-24-2012 07:42 PM #11
Re: Sneak Peek
Originally Posted by KillerKaw
Shiney ash trays
Awesome, very beautiful
Aint they though!!
Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
02-26-2012 08:38 PM #12Eric the Enabler
- Join Date
- Sep 2008
- Location
- Hildreth, Nebraska
Re: Sneak Peek
Is it done yet??
Turbo Division Member #22
2000 ZRX 1100 Turbo (never done)
1983 RX 50 Chopper (clothes rack)
1963 sears puch (inheritied)
1980 KZ 1000 (out of progress)
It will either go REALLY fast... or blow up spectacularly!!
Amatures built the Arc,
Professionals built the Titanic
-
02-27-2012 11:03 AM #13Livn the Turbo ZRX life
- Join Date
- Jan 2009
- Location
- around the space needle...
Re: Sneak Peek
You have seen the Light! Hallelujah!!! Originally Posted by warren
All in good time. Saturday will be the day. Piston, head w/double valve springs, cylinder studs and nuts, new 12v. fuel shut off valve. Preparing for new turbo. Preparing to install shorter swingarm. As you see the list is extensive. Shouldn't take long though. I've got to hurry up. The weather is getting nice again. Oh yea and by the way, No more 8 psi
pratice going in corners hot, you'll need it. going in full lean to save my ass happens about 3 times a year for me Originally Posted by warren
Yep, I'm going shorter on the arm. Figured it was time to really unleash the beast and let her fly around some twisties. should be interesting to say the least.
(edit: to stay inside yellow line, not edge of road!)
Last edited by LivnLife4Fun; 02-29-2012 at 10:18 AM.
-
02-27-2012 06:26 PM #14BadAss Hooligan
- Join Date
- Aug 2005
- Location
- Tuscaloosa , Alabama
Re: Sneak Peek
How long over stock are you , and how much shorter are you going ? My ZRX is somewhere about ~9" over ...
Joel
Turbo Division Member # 16
-
03-15-2012 12:07 AM #15
Re: Sneak Peek
Originally Posted by LivnLife4Fun
You have seen the Light! Hallelujah!!!
pratice going in corners hot, you'll need it. going in full lean to save my ass happens about 3 times a year for me (edit: to stay inside yellow line, not edge of road!)
Anouther small piece to the puzzle. Next mod to arm, Bracing
Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
03-15-2012 01:10 AM #16Eric the Enabler
- Join Date
- Sep 2008
- Location
- Hildreth, Nebraska
Re: Sneak Peek
looks shiney!!
Turbo Division Member #22
2000 ZRX 1100 Turbo (never done)
1983 RX 50 Chopper (clothes rack)
1963 sears puch (inheritied)
1980 KZ 1000 (out of progress)
It will either go REALLY fast... or blow up spectacularly!!
Amatures built the Arc,
Professionals built the Titanic
-
08-12-2012 09:52 PM #17Hooligan
- Join Date
- Aug 2009
- Location
- Carol Stream, Illinois
How is your project cpming along?
94 ZX11D
5 Inch stretch
190 main jets, 4 clips down
Custom built turbo kit, AR.60, sheet metal intake
Motor work by Fornarelli Motorsports
Polished everything
Custom paint & airbrushing
Starting methanol injection system
-
08-16-2012 03:42 PM #18Thread Starter & Stuff
TELEMUNDO!!!!!!!!
- Join Date
- Oct 2003
- Location
- Fort Bragg Ca.
Re: Sneak Peek
shh...it's a SECRET and stuff Originally Posted by JDawgZX11D
ZRXOA # 5251
-
09-10-2012 03:40 PM #19
Re: Sneak Peek
A few more tidbits to entice the curious.
Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
09-10-2012 03:47 PM #20Bad, Bad Archaeologist
- Join Date
- Nov 2001
- Location
- First Floor of the Hyundai Building aka: Suzie
Re: Sneak Peek
Originally Posted by John T
Shame on kwick for not sending you some Ti hardware for those nice radiator straps...
Warren, turn the flash off...
-
09-10-2012 04:14 PM #21
Re: Sneak Peek
Originally Posted by John T
Shame on kwick for not sending you some Ti hardware for those nice radiator straps...
Well hey John, How's the moderatin going there buddy? And you are right I was a little heartbroke that there was no lightweight goodies.
Done. Flash not good, make flash go by Originally Posted by KWICK
Warren, turn the flash off...Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
09-10-2012 04:48 PM #22Savannah Six charter member
- Join Date
- Mar 2004
- Location
- Middle of town in the middle of Ct
Re: Sneak Peek
I like these threads ...
There comes a point in your life when you realize. Who matters.Who never did.Who won't anymore.And who always will.So,don't worry about people from your past.There's a reason why they didn't make it to your future.
-
09-10-2012 04:55 PM #23Moderator
Green Blooded
Ham & cheese
- Join Date
- May 2005
- Location
- Northern, WI
Re: Sneak Peek
I think the lightest thing Kwick makes is your wallet.
I slay myself.....It ain't easy being cheesy.......
-
09-10-2012 05:31 PM #24BadAss Hooligan
- Join Date
- Aug 2008
- Location
- People's Republic of Connecticut.
Re: Sneak Peek
Originally Posted by warren
ZRXOA #7915
SNERR#23 and SNEWR member in good standing
NEVER FORGIVE, NEVER FORGET.
ΜΟΛΩΝ ΛΑΒΕ
Originally Posted by DaisyCutter
BOTM January 2013 Originally Posted by JoRay31
-
09-10-2012 06:25 PM #25Bad, Bad Archaeologist
- Join Date
- Nov 2001
- Location
- First Floor of the Hyundai Building aka: Suzie
Re: Sneak Peek
Originally Posted by mikeboileau
I think the lightest thing Kwick makes is your wallet.
I slay myself.....
-
09-10-2012 07:38 PM #26BadAss Hooligan
- Join Date
- Oct 2008
- Location
- Anderson Indiana
Re: Sneak Peek
I want to see this inter cooler set up
Turbo Division Member # 29
2003 ZRX-T
1397 Hayabusa all motor 198hp (aka Virgin)
-
09-10-2012 10:09 PM #27Eric the Enabler
- Join Date
- Sep 2008
- Location
- Hildreth, Nebraska
Re: Sneak Peek
Lookin really good Warren!
Keep it up
Turbo Division Member #22
2000 ZRX 1100 Turbo (never done)
1983 RX 50 Chopper (clothes rack)
1963 sears puch (inheritied)
1980 KZ 1000 (out of progress)
It will either go REALLY fast... or blow up spectacularly!!
Amatures built the Arc,
Professionals built the Titanic
-
09-10-2012 11:30 PM #28
Re: Sneak Peek
Originally Posted by Geoffery86
When riding season is over this is what is going on. Just have to weld one more tube on it'
Sorry about the pic. I must have had the flash on
I'll be calling ya soon about anouther plenum box buddy Originally Posted by Gearhead119
Lookin really good Warren! Keep it up Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
-
09-11-2012 12:07 AM #29TALLER THAN KILLERKAW!!
motorcitywho?
- Join Date
- May 2007
- Location
- Chattavegas Tn
Coming along quite nicely
ZRXOA #8282 ZRX1109 Turbo Division Member #30 December 2012 BOTM winner
Originally Posted by hydrashoks
Originally Posted by McGovZRX
You, Sir, are a bad, bad, tasteless man. Can I marry you?????
-
09-16-2012 02:01 PM #30
Re: Sneak Peek
And Finally!
Intercooler and a few other tastey mods coming soon.
Last edited by warren; 09-16-2012 at 02:31 PM.
Originally Posted by flying dave
Location: Nashville Opens door, pulls pin and tosses.....
Turbo bikes suck. You should all be riding a SV...........
Closes door. Runs and hides in the dark....
-----------------------------------------------
Reply With Quote
....ON THE ROAD TO YTRAP SOON!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts