What $39 gets you from Hong Kong these days

[savedzrex]

I was stunned on how nice the package and the labeling was and how the personal it appeared. That sounds strange but, the package had ribbon on it like a gift box


and I am very happy with the product...

It took only minutes to install both (Shorty Levers)

[Murf300]

Greg, I need to sample those levers. I have been wanting to get some for a while.

[Dave Ditner]

And more. The difference in feel is unbelieveable. I don't give a damn if the sun turns 'em purple.

[KWICK]

Smurf levers?

[KWICK]

Hey, SEM "Trim Black" works petty darn good on levers. I used to do mine every couple years with it.

[Super Dave 436]

Received mine today. They shipped the day I ordered. Just short of 2 weeks to the east coast from the other side of the planet. Package as described ribbon, bags, etc. I chose black full size with green adjusters. No brass pivot bushings but Pazzo does not have that either. Need to use the brass pivot for the clutch. Have not had a test ride yet but they appear pretty dam nice for $37.99 to your door.

You do not need to use E-bay order from their web page at http://shop.the2wheels.com/main.sc

[REXNFX]

mine faded like crazy. They started off black and they don't look anything like black anymore. they,however, didn't turn out ugly. I kind of like the way they look. it evokes intrigue. I definitely like the feel of the levers better than stock and I don't regret my decision at all

[btl68]

I ordered from the2wheels a few months back and received the levers in 8 days. Very pleased. http://shop.the2wheels.com/

[SonicGuppy]

Valentino Rossi

http://shop.the2wheels.com/CNC-Foldi...t-Kawasaki.htm

[JBoz]

I just got a set for the Track Wrecks and the '14. Yep, impressed w/ quality, packing & ship time. ZRX fit fine but I had to drill the '14 clutch "dimple?" deeper where the clutch rod seats in the brass barrel. It wasn't completely releasing the clutch as it came.

[Hogan]

very wise idear - I had to dremel out the clutch pivot and my handles were a bit loose - I tightened up the lock nuts & bolts but the drill and insert is a good tip - thx

And Joe, did you try tightening the lever pivot bolts? Mine were loose from the factory, so that helped a bunch on the slop. Still not a Pazzo, but $160 cheaper...

Also, if you want a really tight pivot bolt, drill out the aluminum a bit and press in a bronze or brass insert that has no slop. I have done it to stock levers that had too much slop at the main pivot.