Ever take a Muzzy Ti can apart?

[kazman]

I can't seem to figger out how to seperate the end caps from the baffle tube,

any experience?

[Hogan]

I can't seem to figger out how to seperate the end caps from the baffle tube,

any experience?

I swapped end caps just by unbolting and pulling - is that what ya want to do or pull the center tube out ?

[kazman]

I unbolted and pulled...

and nuthin'.

wouldn't come apart, 'course I didn't use a a lot of force.

[Hogan]

I pulled with force,but tempred if ya know what I mean... just be steady and pull with a bit of twist but dont dent it

[kazman]

Ya that's what i was skeered of...

figgered it was best left alone I'll giver another shot.

[Hogan]

the pull/twist wiggle worked for me - good luck

[flying dave]

You just stick it in there until it breaks.


Giggity...

[kazman]

it kin always make a nice door stop.

[bmannon]

A little lube never hurts, then twist, wiggle and pull.

[Jims_rex]

Dennnis, call me if you've not got this apart yet. The Ti is tricky to put back together.

[Pops]

I have not been able to get the mid pipe off the header on my Muzzy stainless. Heated with torch, nothing works. Any ideas??

Pops

[bmannon]

May I suggest this......

[btl68]

I have not been able to get the mid pipe off the header on my Muzzy stainless. Heated with torch, nothing works. Any ideas??

Pops

Try spraying a penetrating oil/lube at the joint. PB Blaster, Kroil or something similar will work, eventually.







Penetrating, lube never hurts, then twist, wiggle and pull You just stick it in there until it breaks...what a dirty-minded thread.

[Mojo Risin']

I have not been able to get the mid pipe off the header on my Muzzy stainless. Heated with torch, nothing works. Any ideas??

Pops

May I suggest this......

Had a muzzy Ti system that wouldn't come apart cept maybe with a plasma torch. I like the hammer idea

[bmannon]

.... I like the hammer idea

I bet you do, that very hammer made you a couple dollars a few weeks back

[Mojo Risin']

I lost money on the deal and now I stuck with one side of paired system

[bmannon]

I lost money on the deal and now I stuck with one side of paired system

ooops
but thanks for helping me out

[DaddyDave]

A little lube never hurts, then twist, wiggle and pull.

that's what she said...