Snitz 5 pole NOS progresive controler

[Sneakyweasl]

Ok I'm running a dyna 2000 to retard timing. And a snitz 5 dial progressive nitrous controller. I would like too know how to set the nitrous controller to trip the timing retard on my dyna 2000 when on the funny gas. thanks.

[Sneakyweasl]

Ok so here is the real problem the Dyna requires a ground signal to go in to retard mode. The Schnits box only pots out a +12 volt signal for the activation circuit what are my options in order to make this work?? I feal like im beating trying to figure this one out. If wiring schematics would help i can post them up.

[SteddyTeddy]

You have to run it off a wide open throttle switch. To get the ground, you will have to wire in a relay. The power from the throttle switch will trip the relay, which is tied to ground.

[Sneakyweasl]

Perfect i have all of that minus the relay. thanks Teddy