looking for fastener info

[NEVERCANTELL]

Am unable to find supplies of this little beauty locally. Its 6mm thread with a very thin head. This one has a phillips ..but could also be plain.
anyone any idea what the actual description of this type of screw is ?
any ideas for a source in NJ area ?

[RedRex02]

Am unable to find supplies of this little beauty locally. Its 6mm thread with a very thin head. This one has a phillips ..but could also be plain.
anyone any idea what the actual description of this type of screw is ?
any ideas for a source in NJ area ?

How many do ya need? and what size is the head (diameter)

[NEVERCANTELL]

need around 100 to start ..more later.
Head size doesnt matter as long as its big enough to not pull thro 1/4" hole ..pic is of a different size item.
Critical thing is needs to be thin

thanks

[Neggy]

google Metric Screw and Tool Wakefield MA

[superdave]

http://www.mcmaster.com/#socket-cap-screws/=6h6bim

[RedRex02]

just went through my Fastenal catalog and the closest they have is a "Flat head carriage bolt"
Carriage bolts have a square shoulder under the head. SAE sizes

They do have a "Low socket cap screw" (bolt) in metric not sure if the head is thin enough for your application though.

[Rick61]

www.boltdepot.com

[Cinco]

We used something like that once, they were called "elevator bolts".

[chuckc]

We used something like that once, they were called "elevator bolts".

In that case, visit elevatorbolt.com: http://www.elevatorbolt.com/


Topeka is your friend.

[NEVERCANTELL]

Thanks Guys..found what I need

[chuckc]

Where?

[NEVERCANTELL]

Thought I had em Chuck..local guy misunderstood what I wanted ..

still looking, elevator bolts would work if they were available in metric

[KWICK]

Where?

He won't tell ya, I think he's makin' centerstands w/'em

[KWICK]

www.mscdirect.com

[NEVERCANTELL]

nice try Quick, but still no joy !

t'would help if I knew what these are called..they are a little like elevator bolts ..and those would work it they came in metric

[Neggy]

http://www.metricscrew-toolco.com/pg23.html

[NEVERCANTELL]

thanks Neggy ..looks like those fender screws might work !!!!
will call em in the am

[Neggy]

thanks Neggy ..looks like those fender screws might work !!!!
will call em in the am

Got this today after sending them the picture

We do, but not as large as M6 (in diameter). I'm thinking a DIN 921's (slotted) may work. They would have a 20mm head OD and the head height would be 3.1mm. If you think they may work let me know


I can grab a couple and mail them to you, my shop is right around the corner

[NEVERCANTELL]

Neggy, Thats really great of you..I had spoken to them this am about the same items and they (Have ? ) mailed me samples already

thanks so much for your help am keeping everything crossed that they will work !!!

[NEVERCANTELL]

still worjking on this guys..looks like I have to have them made specially !

found a small company in FL who are quoting

Nightmare !!