quick stand

[maverick9611]

just picked one up and they work purty good.

[Mojo Risin']

Couldn't live without mine on trips

[Craig H.]

How steady is the bike when on the stand. I get the brake lever being applied, but it doesn't "appear" as though it would be very steady.

Craig

[maverick9611]

bike is very steady on the stand. a little tricky getting it straight up but with practice its a snap. caution!!when kicking out stand make sure your foot is not under back tire. a must have tool on long trips

[rowdyram]

Love mine, ESPECIALLY on trips. For chain lubing and rear tire repair on the side of the road they rock. Just make sure you take something to put under it too, or park the bike on a truly hard surface, or it'll sink (don't ask me how I know).

[maverick9611]

Love mine, ESPECIALLY on trips. For chain lubing and rear tire repair on the side of the road they rock. Just make sure you take something to put under it too, or park the bike on a truly hard surface, or it'll sink (don't ask me how I know).

good point that i didn't know

[slerickson]

Hope it wasn't expensive as I just made one with some 1/2" emt.

[ginoe]

+1

i dig mine, use it all the time

[danaceau]

Had one for a few years. VERY handy on the road for chain maintenance.

[triscadek]

I've had one for several years and love it.

I keep the velcro strap on my handlebars for a "parking brake" if I ever need to park pointing even slightly down hill.

[Todzilla]

How much $$? And where can one obtain this tool??

[triscadek]

How much $$? And where can one obtain this tool??

http://www.aerostich.com/quick-stand.html

[Wolfman]

I use mine when I camp for added security in windy conditions, as well as chain maint.and cleaning. Very"Handy"

[maverick9611]

or
http://www.motorcycleradar.com/quick_stand.htm

[kirk]

thats a neat little tool..........never even seen one before.

[rowdyram]

thats a neat little tool..........never even seen one before.

A quick word of warning...the one I have does not work with the spools I have on the swingarm...the spools are too big around for the cable to go over. On trips, I take the actual spool off the right side and just run the bolt.

Hope that helps someone.

[Perko]

I have one but can't find a way to make it work on the C14.

SS

[LawnBoy]

I have one but can't find a way to make it work on the C14.

SS

Dibs and no I twasn't stalking ya.

[Perko]

Dibs and no I twasn't stalking ya.

Yes you were and OK BUT you need a spool.

SS

[sillyhillbilly]

A quick word of warning...the one I have does not work with the spools I have on the swingarm...the spools are too big around for the cable to go over. On trips, I take the actual spool off the right side and just run the bolt.

Hope that helps someone.

then u got an old one, i sent the guy the same info, told him to lengthen the cable loop and it would work on small or large dia spools.

you can get it apart by taken the set screw out and you got ther spring retainer, you go to lowes get cable 1 inch longer total length, that .5 in per side of loop. crimp in the squeeze on clamp and you got a stand that works perfectly . mine does

mbr

[Radical]

Yes you were and OK BUT you need a spool.

SS

Perko, Ive got a spool should this fall though, Ill buy it?? just pm me..