2.5 FP jet ?

[beantown]

Anyone have the install instructions they can email me? I need to know what jets are in them and need the instructions.

Thanks,
Shane

[Perko]

I'll look when I get home ... I have a new kit.

SS

[BCandtheBrain]

Default settings are .....130/132 mains (staggered), needles on 3rd clip, screws at 2-2.5 on 38 pilots....floats at stock levels...

I did not need the pilots, went with 128/130 mains, 3 for the needles...and eventually went to 125 or 126/128 and 3.5 on the needles...but my final settings are for use at altitude, plus my muffler does not seem to flow as well (Akra header, supertrapp muffler).

This is from memory...I am confident on the 130/132 mains, needle, clip and pilot settings for the default, but the screw settings I am not positive about....Give them a call, they were always willing to help when I was setting mine up.

BC

[K-rex]

All depends on your particular pipe/can!

[beantown]

All depends on your particular pipe/can!

2 into 1 times 2! And Yoshi carbon fiber RS3 cans.

Pssst in the pic it's on the table in the back ground!