Which Can to use with D/J stage 1?

[Radical]

My bike already has a dynojet stage 1 jet kit with a D&D carbon fiber can. Id like to change the can to something else which is still compatiable with the jets? What type of baffel? Brand or sugestions would be much appericated. Thanks
Can & jets, great low end, pipe and jets, great mid, and high rpm range.
Really I'd just like a new can and dont want to have to fool with the carbs. who's running a can and what brand with this jet kit?

[Bob 37]

Any slip on / bolt on can will work the same. Most of the flow characteristics come from the header. You won't have to change jetting by putting a new can on.

[Radical]

thanks BOB37, shortly after I bought the bike I put a scorpion can on without rejetting, hand lots of popping on decel? went to this D&D, had to rejett it because it woulnt run right. after the rejet the popping went anyway? The fuel demand on the D&D is obviously higher? Im considering A Dale walker or another scorpion. the Walker I know Ill be good to go but due to past experince with the Scorpion would that be two rich? I appericate the help, obviously Im not a carb/exhaust set up guy. Also one last thing, would the carbs need adjusted to the new can? If how, please direct me to how its done. Thanks for the help..

[kfoster]

Ray,

Did you get rid of the Kleen system? Should not be a big deal to go to another slip-on at all, especially if you did re-jet before. Send me a p.m. I am down in Naples, and may be able to give ya' a hand.

[Radical]

Ok, thanks Kfoster, Ive sent you a pm.