Search:

That's a shame. Damn.

Just bought a USA made 14pc Craftsman screwdriver set for 15 bucks at Northern Tool. Went to a Sears across the road from it and did not find one single USA tool. Strange..

We have lots of rice fields here and many years ago an AgCat pilot, a very experienced WWII fighter pilot, tail hooked a power line with the aft landing gear while seeding fields on Major drive. The...

Update??

MAC Tools is a Stanley company as is Proto.

You can easily make a stand with a drawer like that.

It is evident that you are intelligent so please take no offense. One of my co-workers somehow got the front of his Nomex shirt tail (he was untucked I might add) in the leadscrew. You can't rip this...

Yes. Arash, or any new machinist, be super cautious using emery cloth or Scotchbrite on the lathe. It will take your hand into your work.

3M Scotch Brite Nylon Pads:
7445 - White pad, called Light Duty Cleansing - (1000) 1200-1500 grit
7448 - Light Grey, called Ultra Fine Hand - (600-800) 800 grit.
6448 - Green (?), called Light...

Scotchbrite with a little oil on it will make a not-so-pretty finish look great, for future reference...

It seems you cold state guys have more ethanol related problems than we down in the hot states.

The 16-49 gear that Hance has is a 3.06 ratio. A 17-52 gear has the same ratio of 3.06, but would accelerate the slowest. With a 15-46 it would be a 3.07 ratio,but it would accelerate the bike...

I am no longer a hunter because I couldn't bring myself to kill anymore. I find it strange that I feel indifferent about this hunter's death because of, I guess.., the fact that he was trying to kill...

If you would like a Brock's track map I might be able to email it for you to try.

I have read in the past that the guys who ran without balance shafts put them back in.
What fuel are you using with the MR12 map?
I had a friend try the MR9 and 12 with no luck. I loaded the...

Cheeeeeeeesssssyyyyyyy.....

Dont see those much anymore.

I do the same thing.

One of the guys that used to work for me had a shop fire about 8yrs ago because of a battery tender. Insurance investigator told him it was not the first time that has happened. Why take chances?

After that "screwing", this thread should be in a nude&crude forum... Ouch!..

If he didnt 60ft the bike it wouldnt run better. The mph on that time ticket is at least good for 9.teen passes. Believe me, I did over 1800 passes on a stock motor at 245lbs suited. A whole tenth...

I ran 9.03-9.08's with a 15t front and 45t rear sprocket with a full stock dressed weight bike extended 9.5 inches with a single stage lockup. Knock that 60ft into the low 1.40's high 1.30's and you...

I bought one for my ZX14 today because they have a 2yr warranty and rated 220cca which tested 350cca with my tester. Anyone have any long term reviews of these? I didnt find any negative reviews but...

Yes.

Water not in the house. Got a few inches in the attached garage but no damage to anything.